材料科学
电化学
电极
阴极
法拉第效率
纳米技术
化学工程
粘附
电致变色
嫁接
复合数
集电器
电致变色装置
石墨烯
点击化学
电化学储能
储能
硫化物
天然橡胶
接触电阻
胶粘剂
作者
Young Joon Park,Kyu Tae Kim,Seunggoo Jun,Jong Seok Kim,Jaehyun Yoon,Cheol Bak,Yong Min Lee,Dong Hyeon Kim,Ji Young Kim,Yoon Seok Jung
标识
DOI:10.1002/adfm.202516017
摘要
Abstract Ensuring low‐pressure operability is imperative in the practical deployment of all‐solid‐state batteries (ASSBs) with sulfide solid electrolytes, highlighting the pivotal roles of functional binders. Herein, slurry‐applicable thiol‐ene click reaction‐derived modifications of styrene‐butadiene rubber (SBR) binders are introduced to enhance the electrochemo‐mechanical stabilities of composite cathodes under low operating pressures. Two key modifications are realized: the grafting of carboxylate functional groups to improve the adhesion and cross‐linking to enhance the modulus and elasticity. A key insight gained is that cross‐linking is considerably more critical in improving the low‐pressure performance than adhesion enhancement. Electrochemical evaluations using single‐crystalline LiNi 0.8 Co 0.1 Mn 0.1 O 2 |Li 6 PS 5 Cl|(Li‐In) half‐cells at 0.3 MPa indicate that LiNi 0.8 Co 0.1 Mn 0.1 O 2 electrodes with the cross‐linked binder exhibit superior electrochemical performances, including higher initial discharge capacities and improved initial Coulombic efficiencies and capacity retentions compared to those of the unmodified‐SBR‐based electrodes (163 vs. 133 mA h g −1 , 68% vs. 73%, and 67% vs. 75% at the 100th cycle, respectively). Comprehensive analyses, including operando electrochemical pressiometry, reveal that cross‐linking effectively maintains the electrode integrity, thereby stabilizing the interfacial resistance during cycling. These findings offer critical design guidelines for practical, high‐performance ASSB systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI