电介质
材料科学
复合材料
聚丁二烯
胶粘剂
介电损耗
光电子学
聚合物
图层(电子)
共聚物
作者
Xuan Kai Zhang,Yang Zhang,Qian Zhou,Xianlong Zhang,Shaoyun Guo
标识
DOI:10.1021/acs.iecr.9b05676
摘要
To solve film formation and creep of nonvulcanized polybutadiene liquid rubber, it was designed and fabricated as a thermosetting, transferable, and symmetrical “sandwich” structure adhesive film through solution coating processing. The adhesive failure evolved from an independent cohesive failure or interfacial failure to a randomly staggered interfacial failure. According to the molecular dynamic simulation, compared to the molecular structure of 1,4-polybutadiene, the isolated π electron cloud of the vinyl side chain of 1,2-polybutadiene can form “chemical-like bonding” with the outer electrons of copper atoms. Meanwhile, the peel strength of the surface-modified polybutadiene adhesive (28.16 N/25 mm) was about three times that of the untreated one (10.11 N/25 mm), and its dielectric properties (ε′ = 2.416 and tan δ = 0.0026) maintained an ultralow level at 10 GHz, which was mainly decided by the electronic and atomic polarization of vinyl. This strategy was helpful to develop a processing method for the adhesive film of nonvulcanized liquid rubber and apply to high-speed signal transmission.
科研通智能强力驱动
Strongly Powered by AbleSci AI