最大功率转移定理
拓扑(电路)
无线电源传输
电气工程
补偿(心理学)
电压
电动汽车
功率(物理)
电容感应
电子工程
网络拓扑
工程类
恒流
电池(电)
控制理论(社会学)
计算机科学
物理
精神分析
人工智能
操作系统
量子力学
控制(管理)
电磁线圈
心理学
作者
Jianghua Lu,Guorong Zhu,Deyan Lin,Yiming Zhang,Haoran Wang,Chris Chunting Mi
标识
DOI:10.1109/tits.2020.2985658
摘要
In both normal and fast wireless electric vehicle charging systems, constant current/constant voltage (CC/CV) charging profile, regardless of the variation of the battery state of charge, is one of the most essential characteristics to ensure the battery performance and reliability. The input zero phase angle (ZPA) is able to minimize the system volt-ampere rating, enhance the power transfer capability, and make it easy to achieve soft-switching operation over the full range of battery charging profile. Therefore, the load-independent CC and CV output characteristics with ZPA conditions are necessary for wireless charging systems. However, the existing methods that can achieve these functions either add power switches or need a large number of compensation components, which make the system inefficient, uneconomical, and bulky. In this paper, a unified resonant tuning configuration with minimum passive component counts is proposed to achieve CC and CV outputs at two ZPA operating frequencies. According to the proposed configuration, all the possible inductive power transfer (IPT) and capacitive power transfer (CPT) topologies are analogized. With these topologies, both CC and CV outputs with ZPA are achieved using a minimum number of compensation components and no additional power switches. Among all the simplest IPT topologies, a primary Series-secondary Series and Parallel (S-SP) compensation topology is illustrated to demonstrate the analysis.
科研通智能强力驱动
Strongly Powered by AbleSci AI