倍半硅氧烷氢
电子束光刻
材料科学
时域有限差分法
谐振器
绝缘体上的硅
灵敏度(控制系统)
抵抗
光电子学
光学
硅
纳米技术
电子工程
物理
工程类
图层(电子)
作者
Lilik Hasanah,Harbi Setyo Nugroho,Chandra Wulandari,Budi Mulyanti,Dilla Duryha Berhanuddin,Mohamad Hazwan Haron,P. Susthitha Menon,Ahmad Rifqi Md Zain,Ida Hamidah,Khairurrijal Khairurrijal,Rizalman Mamat
出处
期刊:Applied sciences
[Multidisciplinary Digital Publishing Institute]
日期:2020-06-18
卷期号:10 (12): 4191-4191
被引量:11
摘要
The properties of light and its interaction with biological analytes have made it possible to design sophisticated and reliable optical-based biomedical sensors. In this paper, we report the simulation, design, and fabrication of microring resonator (MRR)-based sensors for the detection of diabetic glucose levels. Electron Beam Lithography (EBL) with 1:1 hydrogen silsesquioxane (HSQ) negative tone resist were used to fabricate MRR on a Silicon-on-Insulator (SOI) platform. Scanning Electron Microscopy (SEM) was then used to characterize the morphology of the MRR device. The full-width at half-maximum (FWHM) and quality factors of MRR were obtained by using a tunable laser source (TLS) and optical spectrum analyzer (OSA). In this paper, the three-dimensional Finite Difference Time Domain (3D FDTD) approach has been used to simulate the proposed design. The simulation results show an accurate approximation with the experimental results. Next, the sensitivity of MRR-based sensors to detect glucose levels is obtained. The sensitivity value for glucose level detection in the range 0% to 18% is 69.44 nm/RIU. This proved that our MRR design has a great potential as a sensor to detect diabetic glucose levels.
科研通智能强力驱动
Strongly Powered by AbleSci AI