结晶
成核
结构化
流变学
棕榈油
材料科学
剪切(地质)
工作(物理)
剪切速率
化学工程
工艺工程
化学物理
生物系统
机械工程
复合材料
热力学
化学
食品科学
物理
工程类
业务
生物
财务
作者
Katlijn R. N. Moelants,Paul R. Smith,Tristan E. Lipkie,Adam Steinbach,Gerardo Leyva,Fenja C. H. Süverkrüp,Joël Wallecan
摘要
Structuring of fatty products is important in producing palatable food products. Saturated fat (SAFA) crystals are needed to bring structure to many products (such as bakery or confectionery). In a product control of the structure by fat nucleation and crystallization, it is important to deliver the correct performance. Many techniques only work on quiescent systems and give limited information about the sheared systems that are generally found in industrial production of products. This article presents a novel rheological technique that can be used to probe crystallization and network structure under sheared conditions. The results show that crystallization of palm oil can be divided into different key stages. These result from initial nucleation, structuring by the crystals, polymorphic transformation, further structure building, and then subsequent relaxation. Significant postcrystallization (sintering) events occur over at least a day. It is seen that the shear rate leads to possibilities for crystallization control. Higher shear gives a reduction in network strength (as measured by G′) of the initial crystal network. However, after longer posthardening, results are very similar. This work enables the development of a fast tool that can be used to monitor structure formation in fats and reveals the relative importance of the nucleation–crystallization and postcrystallization events in sheared systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI