蒙脱石
沸石
吸附
化学
粘土矿物
过程(计算)
化学工程
有机化学
矿物学
催化作用
工程类
计算机科学
操作系统
作者
A. Arefi Pour,Shahram Sharifnia,Rasoul Neishabori Salehi,Masoud Ghodrati
标识
DOI:10.1016/j.jngse.2016.11.006
摘要
Abstract In this study, the effects of parameters such as crystallization time and temperature on the phase and morphology of NaA zeolite prepared by hydrothermal method were investigated. The textural properties of the synthesized zeolites were characterized using XRD, SEM, FTIR and BET analyses. The findings revealed that the optimum time and temperature of NaA preparation to be 20 h and 363 K, respectively. The adsorption experiments of CO 2 and CH 4 by synthesized and commercial NaA zeolites were carried out at three temperatures (277, 290 and 310 K) for pressures up to 10 bar. The experimental data were analyzed using Langmuir and Sips equations, and the Sips model better described the experimental data. It was found that the synthesized NaA had BET specific surface area of 222.8 m 2 g -1 and pore volume of 0.096 cm 3 g -1 . Also, the adsorption capacities of 5.2 and 2.6 mmolg −1 were obtained for CO 2 and CH 4 by the synthesized samples, respectively. Comparing with commercial sample, the synthesized zeolite showed higher adsorption capacities for CO 2 and CH 4 under the same condition. The heat of adsorption at zero coverage of CO 2 and CH 4 on the synthesized NaA zeolite were found to be 48.5 and 24.4 kJ mol -1 , respectively. The ideal CO 2 /CH 4 selectivity of the synthesized and commercial zeolites were 7.1 and 6.4, respectively, at atmospheric pressure and 290 K. The dynamic adsorption experiments of CO 2 /CH 4 gas mixture confirmed that the synthesized NaA zeolite had more promising performance for the separation of CO 2 /CH 4 compared to the commercial zeolite.
科研通智能强力驱动
Strongly Powered by AbleSci AI