光催化
煅烧
材料科学
光电流
制氢
试剂
次磷酸钠
热液循环
X射线光电子能谱
化学工程
氢
光化学
化学
纳米技术
催化作用
物理化学
有机化学
工程类
电镀
光电子学
图层(电子)
作者
Youlin Wu,Haiyan Zhang,Youji Li,Zhiliang Jin
标识
DOI:10.1016/j.ijhydene.2022.08.205
摘要
2D Cu2S snowflakes and 2D Ni-MOFs flakes were synthesized by hydrothermal method, and Ni-MOFs were calcined with sodium hypophosphite at 200 °C to form Ni-MOFs-P (Ni-MOFs/Ni2P). In the physical mixing process, since the -formation temperature of Cu2S is at 80 °C, the physical mixing temperature was controlled at 80 °C, which is advantageous for achieving a close 2D/2D contact. The results showed that 15 vol% TEOA with pH = 10 was used as sacrificent reagent under 5 W LED simulated visible light. 20 mg of EY was used as a photosensitizer. CNP60 had the best hydrogen evolution performance within 5 h, which was 3122.76 μmol g−1 h−1. The hydrogen evolution rate of CNP60 is 8.72 fold, 3.37 fold, and 91.85 fold faster than that of Ni-MOFs, Ni-MOFs-P, and Cu2S, respectively. Ni-MOFs phosphating and Cu2S loading can reduce the photocatalyst's photogenerated electron and hole recombination efficiency. This significant improvement was achieved through XRD, SEM, TEM, XPS, UTV-Visible DRS, transient photocurrent, steady-state fluorescence, short fluorescence, related substance reporting studies, radical hydroxyl trapping, and more. The results show that the 2D/2D assembled CNP can effectively enhance the ability to reduce H∗, and a possible photocatalytic hydrogen production mechanism is proposed.
科研通智能强力驱动
Strongly Powered by AbleSci AI