黄斑病
黄斑变性
生物相容性
眼科
光学相干层析成像
极限抗拉强度
材料科学
复合材料
眼底(子宫)
傅里叶变换红外光谱
环氧树脂
聚氨酯
弹性模量
磁共振成像
巩膜
拉伸试验
缩进
生物医学工程
作者
Zi Fu,Yan Zhou,Ziyi Liu,Zhe Chen,Qiang Fu,Shiqun Lin,Rongping Dai,Huade Zheng
摘要
nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) spectroscopy, and mass spectrometry (MS) confirmed successful synthesis. Photocuring kinetics under 465 nm visible light achieved an optimal storage modulus within 82 s, coupled with a minimal curing shrinkage (7.2%). By tuning flexible PCL segments, the material exhibited a tensile strength of 25 MPa and an elongation at break of 32%, balancing strength and elasticity. The resin demonstrated environmental stability (water contact angle: 72°; water absorption: 8.8%; and thermal decomposition: 420 °C) and exceptional biocompatibility (hemolysis rate <0.5%; cell viability >97%). Liquid crystal display (LCD) 3D printing produced cost-effective MB devices that provided stable scleral indentation in rabbit models, with few complications, and no pathological structural changes in the optic nerve and retina, showing good biocompatibility and safety. This work establishes PCL-NIPUA as a synergistic platform combining green chemistry, rapid photocuring, mechanical adaptability, and biosafety, offering a clinically translatable solution for customized 3D-printed implants in MB surgery.
科研通智能强力驱动
Strongly Powered by AbleSci AI