摩擦电效应
能量收集
纳米发生器
电气工程
材料科学
振动器
功率(物理)
能量转换
振动
电压
声学
工程类
物理
量子力学
热力学
复合材料
作者
Chen Wang,You-Hong Ji,Siu-Kai Lai,Yuhao Liu,Ying Jie Hao,Gaolei Li,Chenxi Wang,Guilin Wen
出处
期刊:Nano Energy
[Elsevier BV]
日期:2023-06-21
卷期号:114: 108630-108630
被引量:53
标识
DOI:10.1016/j.nanoen.2023.108630
摘要
This work proposes a new speed-amplified multi-stable tri-hybrid energy harvesting technique via the multi-stable nonlinearity enhanced frequency up-conversion and rack-pinion mechanisms to efficiently harness structural and biomechanical vibration energy. In the present design, two frequency up-conversion piezoelectric generators, an array-type electromagnetic generator and a sliding-mode triboelectric nanogenerator are integrated together to form a compact and interactive system. By utilizing the rack-pinion mechanism, the relative speed between the stators and the translators of the electromagnetic and triboelectric generators are both doubled. Meanwhile, the process of frequency up-conversion in the piezoelectric generators is also doubled per each cycle. This results in better performance under wideband and low-frequency vibration sources. For verification, a prototype of this design is tested by mechanical excitations and body-induced motions. In the shaker test, the prototype can generate a peak output power of 446.16 mW under an optimal resistance load, resulting in a normalized power density of 4.20 mW cm–3 g–2 at 5 Hz under 1 g. The prototype also exhibits exceptional performance under various human motion tests, it can drive 600 commercial light-emitting diodes simultaneously. Using a commercial DC/DC voltage regulator circuit, the proposed harvester can serve as a universal power source to charge commercial electronic devices, including smartphones and GPS sensors. The present design shows great potential as a sustainable power source for wearable/portable electronics as well as wireless monitoring systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI