CO2 Switchable Pickering Emulsion Stabilized by Responsive Janus SiO2 Nanoparticles for Enhanced Oil Recovery

The CO2-responsive Pickering emulsions employed have garnered considerable attention across enhanced oil recovery agents, delivery of crude, and oilfield-produced fluid treatment. This study focuses on the design of an innovative type of Janus nanoparticle (JNP) and its application in the construction of CO2 stimuli-responsive Pickering emulsions. The emulsion stabilized by JNPs demonstrates swift phase separation subsequent to the injection of CO2. Furthermore, the mechanism of the CO2-stimulated responsiveness enabled by the JNPs was proposed. Based on the Schiff reaction, the synthesis of JNPs was achieved successfully via the Pickering emulsion template method. The properties of the JNPs were studied using various analytical techniques such as Fourier transform infrared, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, etc. The developed responsive system, composed of JNPs and sodium oleate surfactant, showed high interfacial activity at the oil/water interface. The study revealed that the responsive system-stabilized Pickering emulsions could remain stable at 70 °C and room temperature for 24 and 120 h, respectively. Furthermore, the introduction of CO2 for 1.5 min resulted in phase separation because the nanoparticles lost the amphiphilic nature, triggering a significant decrease in interfacial activity and the protonation of sodium oleate surfactant inactivation. Then, the particles started to desorb from the interface. This study proposes a convenient, simple, and cost-effective approach for preparing fast CO2-responsive Pickering emulsions. It provides novel insights into the advancement of oilfield-produced fluid treatment, transportation of crude oil, and enhanced oil recovery.