Molecular structure regulation of functional polylactic acid based on chain expansion reaction and its improved hydrolysis resistance

Abstract In this work, the functional polylactic acid (PLA) was synthesized using epoxy chain extender (ADR) as a chain extender agent through melt blending method. The effects of ADR content on the molecular structure, thermal properties, and tensile properties of the functional PLA were investigated. Meanwhile, the hydrolytic behavior of the PLA/ADR materials at different hydrolysis temperatures was explored. It was found that ADR effectively regulated the molecular structure of PLA in the molten state and significantly increased the relative molecular weight, storage modulus, and complex viscosity of PLA. In addition, the Cole‐Cole diagram results suggested the branched structure of PLA chain expansion systems. Based on mechanical property tests, it was noted that the addition of ADR made the molecular chain form a micro‐crosslinked structure. Additionally, the mass loss rate of PLA/1.6ADR (the dosage of ADR was 1.6 wt%) was 14.75% after 14 weeks of hydrolysis under hydrolysis conditions at 58°C, while that of pure PLA was 25.89%. Moreover, the functional PLA/ADR materials exhibited significantly slower decrease rates in molecular weight, melting temperature, and tensile strength, and still maintained intact morphology after 14 weeks of hydrolysis compared to pure PLA. Therefore, the molecular structure of PLA is effectively regulated by ADR, which greatly enhances the hydrolysis resistance and further promotes the range of application of PLA.