Accuracy and margin quality of advanced 3D printed monolithic zirconia crowns

Nanoparticle jetting (NPJ) is a novel ceramic 3D-printing technology with high printing accuracy. However, studies reporting the accuracy of zirconia crowns manufactured by NPJ and comparing them with conventional zirconia crowns are lacking.The purpose of this in vitro study was to evaluate and compare the trueness, crown fit, and margin quality of monolithic zirconia crowns manufactured by NPJ with those milled by a computer numerical control system.A gypsum left mandibular first molar was prepared and scanned with an intraoral scanner (TRIOS 4). Three types of monolithic crowns were manufactured through 3D printing and subtractive manufacturing (SM): NPJ (3D printing), VITA (milling), UPCERA (milling). The crowns were scanned, and the dimensional deviation (trueness) was evaluated and compared by using a software program. The triple scan method was used to measure crown fit and uniform index through precise alignment in the software program, and margin quality was also observed with an optical microscope. The data were analyzed with 1-way analysis of variance and the Tukey post hoc test (α=.05).The NPJ group reported better trueness of all crown and axial surfaces compared with the other SM group (P<.001), but marginal trueness (P=.601), intaglio surface (P=.596), and occlusal surface (P=.641) were statistically similar compared with the Vita milled group. All 3 groups reported clinically acceptable crown fit and uniformity with statistically similar values (P>.05). The NPJ group had more crowns judged to have flawless margin quality compared with the milled groups.All 3 manufacturing methods can fabricate zirconia crowns with a clinically acceptable crown fit. The NPJ system could be used to manufacture monolithic zirconia crowns with better margin quality and proximal surface trueness than milled crowns.