Fabricated magnetic adsorption – Forward osmosis membrane hybrid system for hydroponic irrigation from rich arsenic–containing heavy metal water stream

Solidification of soluble arsenic from extremely acidic water and direct use of recovery water have been the major challenges in global water management, with the urgent need for new treatment system development. Thus, magnetic adsorption – fertilizer drawn forward osmosis (FDFO) hybrid system with a novel adsorbent and fertilizer mixture to solve the drawbacks of each process was developed with the ultimate goals of metal removal and direct reuse for hydroponic irrigation. Magnetic metal-organic framework-based adsorbent (CMM) was synthesized with various promising capabilities, i.e., wide pH range efficiency, strong pH adjustment, good stability, fast adsorption (1 h), and oxidation (40 min), high capacity (175 and 126 mg/g for As(III), As(V)), strong magnetization (75 emu/g), complete separation by a magnet, excellent interference-tolerance and reusability. In the FDFO system, a massive water volume (50 times higher than the initial draw solution with suitable nutrients for hydroponics irrigation with acceptable NaCl levels was obtained for the first time up to now. However, low As(III) rejection (50%) required the FDFO process to improve more. After integrating with magnetic adsorption, nearly 100% of As was removed. The pH of feed solutions adjusted from extremely acidic to close to neutral conditions further solidified metal by precipitation and membrane separation processes, leading to almost no detection of metals in the final draw solution. Also, favorable nutrients and excellent reusability were obtained. This hybrid process would generally offer an environmentally sustainable and high efficiency for decontaminating As-containing heavy metal water for hydroponic irrigation.