涂层
润湿
材料科学
接触角
复合材料
环境友好型
透射率
生态学
生物
光电子学
作者
Juan Xiang,Xiaoying Liu,Yan Liu,Xin Lin,Yan He,Ling Luo,Gang Yang,Xiaohong Zhang,Chengyi Huang,Yanzong Zhang
标识
DOI:10.1016/j.ces.2021.116749
摘要
Abstract During the outbreak of COVID-19, the fogging of goggles was a fatal problem for doctors. At present, there are many ways to prevent fogging by adjusting surface wettability. However, the mechanical properties of most super-hydrophilic antifogging coatings are poor, easy to lose their antifogging properties when encountering fingers or cloth friction. To address this issue, the Konjac Glucomannan was cross-linked with water-soluble silicone fluid to form a binder, then being combined with the modified Ecokimera to prepare an eco-friendly super-hydrophilic coating that possessed excellent super-hydrophilicity, and the water contact angle (WCA) was 2.51 ± 1°. In addition, the WCA is still less than 5° after 180 times of antifogging tests. The friction resistance of the coating was as high as 24 m. Moreover, the light transmittance was only reduced by 3 %. Besides, they also had the excellent self-cleaning property. After being stored in the laboratory environment for 90 days, it can still maintain the hydrophilic property (WCA is about 5°). In general, the method proposed in this study is low-cost and eco-friendly, and can be widely used in the preparation of antifogging coatings.
科研通智能强力驱动
Strongly Powered by AbleSci AI