磨细高炉矿渣
催化作用
材料科学
方位(导航)
熔渣(焊接)
冶金
高炉
废物管理
化学
水泥
有机化学
地图学
工程类
地理
作者
Ming Kong,Handan Zhang,Yunchuan Wang,Qingcai Liu,Weizao Liu,Hongli Wu
标识
DOI:10.1016/j.jece.2022.108238
摘要
Exploring novel low-temperature SCR catalyst supports with excellent properties and low cost is a significant challenge. Ti-bearing blast furnace slag (Ti-BFS) presented great potential in this field due to high contents of Ti, Si and Al elements. In this work, Ti-BFS was pretreated and optimized by hydrochloric solution, and suitable treatment conditions were obtained. Ti and Si were well enriched and other components (especially Ca) were mostly leached, while the modified slag exhibited well-developed porosity and high surface area. An efficient MnO x -CeO 2 /Ti-bearing blast furnace slag catalyst (Mn-Ce/ATS) can be developed by loading appropriate MnO x -CeO 2 ingredients on this support. 4Mn-Ce/ATS catalyst performed better SCR performance because of its excellent NH 3 adsorption capacity and reactivity, as well as more alkali sites. Cerium was beneficial to bond NH 3 species and manganese was advantageous to adsorb NO. Although SO 2 resistance of this catalyst was relatively undesired, its H 2 O resistance was perfect. This work can provide a guidance on realizing waste Ti-bearing blast furnace slag utilization and reducing the denitrification cost. • Ti-bearing blast furnace slag was successfully utilized as catalyst support. • Appropriate Mn/Ce mole ratio was 4 for MnO x -CeO 2 /Ti-bearing blast furnace slag catalyst. • The obtained catalyst performed excellent H 2 O resistance and low-temperature SCR activity.
科研通智能强力驱动
Strongly Powered by AbleSci AI