材料科学
复合材料
剪切(地质)
弯曲
抗剪强度(土壤)
环境科学
土壤科学
土壤水分
作者
Sedat Süsler,Mustafa Özgür Bora,Cem Uçan,Halit S. Türkmen
标识
DOI:10.1080/09276440.2022.2120739
摘要
The effect of surface treatments on hot-pressed GLARE 3/2 laminates included AA6061-T6 is evaluated in this paper. Sandpapering, degreasing and both degreasing and sandpapering are applied on AA6061-T6 sheets in order to contribute the improvement of the interlaminar shear strength (ILSS). The three-point bending tests are carried out by using two different span length-to-specimen thickness ratios (S/h) to examine also the effect of shear and bending on deformation and failure characteristics. Strength values and failure modes are obtained for both S/h ratios and all surface treatment types. Load-displacement and stress-displacement curves are evaluated. The results show that the maximum shear strength values for surface-treated laminates are increased by between 29% and 37% against untreated one. It is observed that the strength values and failure modes of all surface-treated GLARE laminates are influenced by an increase in the S/h ratio from 4.0 to 10.0 because of the increase in bending effect against shear.
科研通智能强力驱动
Strongly Powered by AbleSci AI