Influence of Calcium Crosslinker Form on Alginate Hydrogel Properties

Alginate hydrogels are attractive for biomedical applications and drug delivery due to their biocompatibility and biodegradability. However, calcium-crosslinked alginates often exhibit only moderate absorption properties compared with synthetic hydrogels. This study examined how the form of calcium ion delivery affects the mechanical, swelling, and morphological characteristics of calcium-crosslinked alginate hydrogels. We prepared four alginate hydrogel samples in which Ca2+ was introduced on different polyacrylate polymer carriers, and a reference hydrogel crosslinked with calcium citrate. All samples were characterized by equilibrium swelling, gel fraction determination, and rheological frequency-sweep measurements. Also, the average mesh size was estimated using two independent theoretical approaches. Hydrogels prepared with calcium salt of polyacrylic acid (PAA) exhibited higher mechanical strength and higher water swelling than the citrate-crosslinked reference. Calculated mean mesh sizes for the citrate system ranged from 58 to 221 nm, whereas high-molecular-weight crosslinked systems showed a broader distribution (68–708 nm). These results demonstrate that the form of Ca2+ introduction significantly influences network architecture and functional properties and indicates that tuning the carrier form of calcium provides a practical route to design swelling, mesh size, and mechanical behavior of alginate-based hydrogels for specific biomedical or delivery applications.