作者
Shuwei Liu,Xian Zhang,Fumitaka Ishiwari,Megumi Okazaki,Akinori Saeki,Kazuhiko Maeda
摘要
Mixed anion compounds exhibit exceptional electronic structure and properties [1] that can be effectively tuned by changing their anionic features specially for energy conversion [2]. Metal oxynitrides are regarded as visible-light responsive photocatalysts with high activity for photocatalytic water oxidation, since nitridation makes the valence-band potential of the oxide semiconductor negative through the contribution of N 2p orbital, which is effective to extend the photoactive region to the visible light. However, a disadvantage of N substitution is that it creates the oxygen vacancies which increases the electron-hole recombination rate. Here, F was utilized as a strategy for compensate the unbalanced charge during the substitution (2O 2– ⟷ N 3– + F – ) in order to suppress the recombination [3] and improve the nitrogen incorporation [4]. On the other hand, porous materials are of great interest because of their ability to interact with guest molecules at surface and improve diffusion into the bulk of the materials through channels [5, 6]. The present work combined the profound advantages of porous materials and oxynitrides to synthesize the N,F codoped mesoporous TiO 2 . To the best of our knowledge, it is the first time for application of this photocatalyst in water oxidation. Hereinto, mesoporous TiO 2 was prepared by microwave-assisted solvothermal method which could be developed as a feasible choice for constructing a mesoporous semiconductor with oriented rutile TiO 2 crystallites by self-assembly approaches. Since there is no template was used in the synthesis, microwave-assisted solvothermal method can fill the gap in the infertile synthesis of mesoporous materials in a facile manner. The resultant mesoporous TiO 2 demonstrated the monodispersed spherical particles and possessed a big particle size of ~2.7 μ m, a low specific surface area of 43 m 2 g –1 with an average pore size of ~5 nm. As-prepared TiO 2 was mixed with different concentration of (NH 4 ) 2 TiF 6 as precursor and heated under a NH 3 gas flow to obtain TiO 2 :N,F. The mesoporous structure could be remained after nitridation when the decent amount (NH 4 ) 2 TiF 6 was added into the system although the structural collapse due to heating. It suggests that the molecules and ions generated during the photocatalytic reaction could be transported into the bulk by channels to further enhance the photocatalytic activity compared with the counterpart that reaction only occurs on the surface. It was verified by TEM that the (101) facet of rutile TiO 2 was mainly expose before and after nitridation, so heating had likely no effect on the exposure of crystalline facet. This mesoporous structure facilitates the nitrogen and fluorine co-substitution, resulting in the narrower band gap from 3.03 eV of mesoporous TiO 2 to 2.25 eV. As a result, the as-prepared mesoporous TiO 2 :N,F demonstrated a superior oxygen evolution rate of 10.5 μ mol h –1 along with great stability under visible light although no other noble metal was used as cocatalyst. It is worth to note that the apparent quantum yield (AQY) of mesoporous TiO 2 :N,F could achieve 5.2% at 365 nm and 3.8 % even at 420 nm. Furthermore, it showed 7 times higher oxygen evolution amount compared with the nano TiO 2 :N,F [4]. References [1] Karim, M.M.S., et al., Chem. Mater ., 2019. 31 (22): p. 9430-9444. [2] Hojamberdiev, M., et al., ACS Catal. , 2022. 12 (2): p. 1403-1414. [3] Kumar, N., et al., Inorg. Chem. , 2013. 52 (18): p. 10512-9. [4] Miyoshi, A., et al., J. Mater.Chem. A , 2020. 8 (24): p. 11996-12002. [5] Zhou, W. and H. Fu, ChemCatChem , 2013. 5 (4): p. 885-894. [6] Yin, S., et al., J. Am. Chem. Soc. , 2024. 146 (2): p. 1701-1709. Figure 1