氢氧化物
膜
电导率
离子交换
化学稳定性
水溶液
化学工程
阳离子聚合
聚合物
离子电导率
材料科学
肿胀 的
高分子化学
离子键合
燃料电池
化学
电解质
无机化学
离子
复合材料
有机化学
电极
工程类
生物化学
物理化学
作者
Huanhuan Chen,Ki‐Taek Bang,Ye Tian,Chuan Hu,Ran Tao,Yufei Yuan,Rui Wang,Dong‐Myeong Shin,Minhua Shao,Young Moo Lee,Yoonseob Kim
出处
期刊:Angewandte Chemie
[Wiley]
日期:2023-08-01
卷期号:62 (38): e202307690-e202307690
被引量:50
标识
DOI:10.1002/anie.202307690
摘要
Abstract The lack of anion exchange membranes (AEMs) that possess both high hydroxide conductivity and stable mechanical and chemical properties poses a major challenge to the development of high‐performance fuel cells. Improving one side of the balance between conductivity and stability usually means sacrificing the other. Herein, we used facile, high‐yield chemical reactions to design and synthesize a piperidinium polymer with a polyethylene backbone for AEM fuel cell applications. To improve the performance, we introduced ionic crosslinking into high‐cationic‐ratio AEMs to suppress high water uptake and swelling while further improving the hydroxide conductivity. Remarkably, PEP80‐20PS achieved a hydroxide conductivity of 354.3 mS cm−1 at 80 °C while remaining mechanically stable. Compared with the base polymer PEP80, the water uptake of PEP80‐20PS decreased by 69 % from 813 % to 350 %, and the swelling decreased substantially by 85 % from 350.0 % to 50.2 % at 80 °C. PEP80‐20PS also showed excellent alkaline stability, 84.7 % remained after 35 days of treatment with an aqueous KOH solution. The chemical design in this study represents a significant advancement toward the development of simultaneously highly stable and conductive AEMs for fuel cell applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI