医学
成像体模
覆盖
制导系统
可视化
增强现实
灵活性(工程)
叠加
生物医学工程
计算机视觉
医学物理学
计算机科学
人工智能
核医学
程序设计语言
工程类
统计
数学
航空航天工程
作者
Ming Li,Sherif Mehralivand,Sheng Xu,Nicole Varble,Ivane Bakhutashvili,Sandeep Gurram,Peter A. Pinto,Peter L. Choyke,Bradford J. Wood,Barış Türkbey
标识
DOI:10.1117/1.jmi.10.2.025001
摘要
PurposeAn augmented reality (AR) system was developed to facilitate free-hand real-time needle guidance for transperineal prostate (TP) procedures and to overcome the limitations of a traditional guidance grid.ApproachThe HoloLens AR system enables the superimposition of annotated anatomy derived from preprocedural volumetric images onto a patient and addresses the most challenging part of free-hand TP procedures by providing real-time needle tip localization and needle depth visualization during insertion. The AR system accuracy, or the image overlay accuracy (n = 56), and needle targeting accuracy (n = 24) were evaluated within a 3D-printed phantom. Three operators each used a planned-path guidance method (n = 4) and free-hand guidance (n = 4) to guide needles into targets in a gel phantom. Placement error was recorded. The feasibility of the system was further evaluated by delivering soft tissue markers into tumors of an anthropomorphic pelvic phantom via the perineum.ResultsThe image overlay error was 1.29 ± 0.57 mm, and needle targeting error was 2.13 ± 0.52 mm. The planned-path guidance placements showed similar error compared to the free-hand guidance (4.14 ± 1.08 mm versus 4.20 ± 1.08 mm, p = 0.90). The markers were successfully implanted either into or in close proximity to the target lesion.ConclusionsThe HoloLens AR system can provide accurate needle guidance for TP interventions. AR support for free-hand lesion targeting is feasible and may provide more flexibility than grid-based methods, due to the real-time 3D and immersive experience during free-hand TP procedures.
科研通智能强力驱动
Strongly Powered by AbleSci AI