生物反应器
再生医学
3D生物打印
组织工程
脚手架
工作流程
生物加工
间充质干细胞
生物医学工程
计算机科学
生化工程
干细胞
细胞生物学
工程类
生物
数据库
植物
作者
Marius Gensler,Christoph Malkmus,Philipp Ockermann,Marc Möllmann,Lukas Hahn,Sahar Salehi,Robert Luxenhofer,Aldo Roberto Boccaccini,Jan Hansmann
出处
期刊:Bioengineering
[Multidisciplinary Digital Publishing Institute]
日期:2024-01-09
卷期号:11 (1): 68-68
被引量:16
标识
DOI:10.3390/bioengineering11010068
摘要
Bioprinting provides a powerful tool for regenerative medicine, as it allows tissue construction with a patient's specific geometry. However, tissue culture and maturation, commonly supported by dynamic bioreactors, are needed. We designed a workflow that creates an implant-specific bioreactor system, which is easily producible and customizable and supports cell cultivation and tissue maturation. First, a bioreactor was designed and different tissue geometries were simulated regarding shear stress and nutrient distribution to match cell culture requirements. These tissues were then directly bioprinted into the 3D-printed bioreactor. To prove the ability of cell maintenance, C2C12 cells in two bioinks were printed into the system and successfully cultured for two weeks. Next, human mesenchymal stem cells (hMSCs) were successfully differentiated toward an adipocyte lineage. As the last step of the presented strategy, we developed a prototype of an automated mobile docking station for the bioreactor. Overall, we present an open-source bioreactor system that is adaptable to a wound-specific geometry and allows cell culture and differentiation. This interdisciplinary roadmap is intended to close the gap between the lab and clinic and to integrate novel 3D-printing technologies for regenerative medicine.
科研通智能强力驱动
Strongly Powered by AbleSci AI