Performance-based seismic design method for disc spring-based self-centering viscous dissipative braced steel frame

Disc spring-based self-centering viscous damper (SCVD) has emerged as a novel technology, offering velocity-dependent energy dissipation and exceptional self-centering capabilities. Integrating this damper in structural bracing systems can effectively enhance passive control over critical structural demands such as peak deformation, residual displacement, and floor acceleration. Nevertheless, a seismic design method specifically tailored for self-centering viscous dissipative braced steel frames (SCVDFs) needs further refinement. This study proposes a performance-based seismic design (PBSD) method for SCVDFs, which is grounded in the performance-based plastic design (PBPD) approach. The proposed procedure primarily considers the effects of two critical hysteresis parameters: the post-activation stiffness ratio and the viscous damping ratio. To verify the effectiveness of the design method, a set of SCVDFs was designed, each utilizing different combinations of design parameters. Nonlinear static and dynamic analyses were performed on these archetypes to evaluate their seismic performance. The evaluation findings demonstrated that the properly designed SCVDFs can achieve the expected design performance and effectively suppress the peak inter-story drift, residual inter-story drift, and peak absolute floor acceleration of the structure, thereby achieving a favorable trade-off in the design outcome and maximizing the advantages of the SCVDF in seismic resilience.