材料科学
阳极
阴极
电解质
电池(电)
润湿
化学工程
电流密度
涂层
电化学
降级(电信)
电极
阴极保护
快离子导体
纳米技术
复合材料
物理化学
电气工程
热力学
化学
功率(物理)
量子力学
工程类
物理
作者
Yang Lu,Xiao Huang,Zhen Lun Song,Kun Rui,Qingsong Wang,Sui Gu,Jianhua Yang,Tongping Xiu,Michael E. Badding,Zhaoyin Wen
标识
DOI:10.1016/j.ensm.2018.05.018
摘要
A highly cycling stable Li-S battery has been fabricated using a Ta-doped garnet (Li6.4La3Zr1.4Ta0.6O12, LLZTO) solid electrolyte. The battery has achieved high reversible specific capacity of 805 mA h g−1 after 500 cycles at a charge/discharge current density of 0.5 and 1.5 mA cm−2, respectively at 25 °C, and the decay rate of 0.0058% (comparing with 20th discharge capacity). The high stability of the battery is attributed to the modifications of both anodic and cathodic interfaces. At the anode side, an Au coating on the LLZTO surface is introduced to reduce the interfacial resistance by improving the Li wetting towards LLZTO. Under semi-solid state mode, it is verified that the Li-Au-garnet based interface could undergo a high current density of 1.5 mA cm−2. At the cathode side, P2S5/Li2S additive in liquid catholyte enhances the solubility of the Li2S to increase the sulfur utilization, and also contributes to the construction of Li3PS4 based Li-ion conductive SEI on the cathode. Coin cells and pouch cells with high sulfur loadings of 3.2 and 5.3 mg cm−2 are assembled to validate the potential of practical application. Both cells exhibit high reversible specific capacities of 1088 mA h g−1 and 799 mA h g−1, delivering areal capacity of 3.5 mA h cm−2, 4.23 mA h cm−2, respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI