作者
Abida Hussain,Mudasar Zafar,Rizwan Safdar,Nadeem Shaukat,Ahmed M. Daabo,Mfano Charles
摘要
Effective battery thermal management is essential for the safety, durability and performance of lithium-ion batteries, particularly under fast charging, high-rate discharge and demanding operating conditions. This critical review presents a structured synthesis of 63 publications identified through Scopus for the period 2017–2026, supplemented by five directly relevant studies incorporated during revision, to evaluate nanofluid-based battery thermal management systems in terms of cooling architecture, nanofluid formulation, modelling fidelity, experimental validation, thermo-hydraulic performance, artificial-intelligence-assisted optimisation and practical deployment. Nanofluids can reduce maximum battery temperature and improve temperature uniformity relative to the corresponding base coolant; however, the magnitude of improvement depends strongly on the reference coolant, nanoparticle concentration, battery configuration, flow condition and cooling architecture. Because the reviewed studies employ different baselines and operating conditions, thermal improvements are interpreted only within comparable configurations rather than combined into a universal performance range. Hybrid and ternary nanofluids may provide additional heat-transfer enhancement, but their system-level advantage over well-selected mono nanofluids can diminish when viscosity, pressure drop and pumping-power requirements are considered. Hydraulic penalties also vary according to the reported metric, with some studies showing moderate pressure-drop increases and others reporting substantially larger pressure-drop or pumping-power ratios under different geometries and operating conditions. The evidence base remains dominated by numerical studies, while long-term nanofluid stability, material compatibility, uncertainty propagation and pack-level experimental validation remain limited. Artificial intelligence is currently used primarily for surrogate prediction and multi-objective optimisation of Battery Thermal Management System (BTMS) designs, with most models trained on Computational Fluid Dynamics (CFD)-generated datasets; consequently, high predictive accuracy generally reflects agreement with the sampled numerical domain rather than independent physical validation. No reviewed study demonstrates experimentally validated, pack-level, closed-loop AI–nanofluid control. Future progress therefore requires reproducible pack-level experiments, durability and compatibility testing, combined thermal–hydraulic–economic assessment, experimentally grounded AI models and coolant-aware adaptive-control strategies.