溶解
材料科学
结晶度
X射线光电子能谱
合金
介电谱
电化学加工
电化学
透射电子显微镜
化学工程
极化(电化学)
机械加工
傅里叶变换红外光谱
冶金
分析化学(期刊)
扫描电子显微镜
复合材料
钝化
腐蚀
衍射
阳极
电极
限制电流
作者
Minglu Wang,Zheng Li,Jingtao Wang,Xinxin Li,Jian Zhang
出处
期刊:Langmuir
[American Chemical Society]
日期:2025-12-31
卷期号:42 (1): 567-586
被引量:2
标识
DOI:10.1021/acs.langmuir.5c04717
摘要
Electrochemical turning is an efficient machining method for machining Ti80 pressure-resistant structures owing to its low tool cost and high machining flexibility. However, research has yet to explore the electrochemical turning of the Ti80 alloy, limiting its widespread application in ocean engineering. Accordingly, this study examined the anodic dissolution behavior and electrochemical turning of the Ti80 alloy in NaCl solution. Ti80 specimens underwent electrochemical tests, namely, potentiodynamic polarization and potentiostatic polarization. X-ray photoelectron spectroscopy was employed to characterize the composition of the passive film formed on the Ti80 surface when Ti80 was placed in a 20 wt % NaCl solution; this film’s structure was investigated through electrochemical impedance spectroscopy (EIS) and transmission electron microscopy (TEM). The results revealed that the passive film mainly contained TiO 2, Al 2 O 3, Nb 2 O 5, ZrO 2, and MoO 3 and comprised two layers: a compact inner layer and a loose outer layer. The measured thickness of the passive film was about 18 nm from TEM, which was near the predicted value (21.6 nm) calculated by EIS data. The diffraction spots obtained from Fast Fourier Transform (FFT) with interplanar spacings of 0.1238, 0.2399, 0.1039, and 0.1888 nm indicated the (024), (201), (521), and (231) crystal planes of TiO 2, respectively, showing a relatively high crystallinity of TiO 2 in the passive film. The dissolution morphologies of Ti80 at different current densities and processing times were analyzed; the dissolution mechanism of Ti80 in 20 wt % NaCl solution was identified. Finally, grooves with relatively sharp edges were machined on a Ti80 cylindrical workpiece through electrochemical turning at rotation speeds of 0.011 and 0.005 r/min.
科研通智能强力驱动
Strongly Powered by AbleSci AI