射频识别
超高频
可穿戴计算机
织物
服装
丝网印刷
可穿戴技术
天线(收音机)
材料科学
无线电频率
计算机科学
声学
电气工程
光电子学
电信
工程类
嵌入式系统
复合材料
物理
考古
历史
计算机安全
作者
Johanna Virkki,Toni Björninen,Sari Linnea Merilampi,Lauri T. Sydanheimo,Leena Ukkonen
标识
DOI:10.1177/0040517514545261
摘要
Future welfare and healthcare applications require wearable radio-frequency identification (RFID) tags where the tag antenna is an integral part of clothing and endures repeated stretching. In this study, wearable passive ultra-high-frequency (UHF) RFID tag antennas were fabricated from silver-plated stretchable fabric and by screen printing them on non-conductive, stretchable fabric. The reliability of the tags was studied by stretching them repeatedly from the initial length of 10 cm to 13.5 cm, up to 200 stretching cycles. According to our results, the electro-textile tags achieved read ranges of 6.5 meters, also after the 200 harsh stretches. The screen-printed tags initially achieved read ranges of 9.5 meters and after the 200 stretches the read ranges were only 2.5 meters shorter, that is, still about 7 meters. These measurement results and the strengths and weaknesses of both types of wearable tags are discussed in this paper.
科研通智能强力驱动
Strongly Powered by AbleSci AI