脲醛
胶粘剂
甲醛
苯酚
醋酸乙烯酯
化学
尿素
高分子化学
有机化学
核化学
材料科学
聚合物
共聚物
图层(电子)
作者
Hakan Keski̇n,Musa Atar,Mehmet Hakan Akyıldız
出处
期刊:Materials in engineering
[Elsevier]
日期:2009-10-01
卷期号:30 (9): 3789-3794
被引量:11
标识
DOI:10.1016/j.matdes.2009.01.032
摘要
Abstract This study has been performed to determine the impacts of Vacsol Azure (VA) on the bonding strength of poly(vinyl acetate) (PVAc), Desmodur-VTKA (D-VTKA), urea–formaldehyde (UF) and phenol–formaldehyde (PF) adhesives on some impregnated wood materials. To this end, the test samples prepared from Oriental beech ( Fagus orientalis Lipsky), European oak ( Quercus petraea Liebl.), Scotch pine ( Pinus sylvestris Lipsky), European linden ( Tilia cordata ) and Lombardy poplar ( Populus nigra Lipsky) woods materials were treated with Vacsol Azure by the Vac–Vac double vacuum impregnation process of ASTM D 1413 standards and directions of the manufacturer. After impregnation, bonding strength test (based on BS EN 205) was applied on both sanded connection surfaces jointed by PVAc, D-VTKA, UF and PF adhesives. Consequently, in the interaction of the impregnated wood materials and adhesive types, the highest bonding strength was obtained in Oriental beech + PVAc (9.707 N mm −2 ) and the lowest was obtained in Lombardy poplar + UF (3.758 N mm −2 ). In consequence, in the massive constructions and furniture elements that the bonding strength after the impregnation with Vacsol Azure is of great concern, bonding with PVAc of Oriental beech wood materials could be recommended.
科研通智能强力驱动
Strongly Powered by AbleSci AI