Boiling heat transfer system is used in a variety of industrial processes and applications, such as refrigeration, power generation, heat exchangers, cooling of high-power electronics components and cooling of nuclear reactors. The critical heat flux (CHF) is the thermal limit during a boiling heat transfer phase change; at the CHF point the heat transfer is maximised, followed by a drastic degradation beyond the CHF point. CHF enhancement, essential for safety and maximize efficiency of heat transfer system. Therefore, this paper examines the differences in CHF based on multi-wall carbon nanotubes and Graphene have been found as new heat-transfer materials which are carbon allotropes with different shapes. The analysis of experimental data and results of calculations in pool-boiling critical heat flux experiments by spray-depositing oxidized multi-wall carbon nanotubes and Graphene onto heat-transfer samples have been done to improve the economic efficiency and safety of the heat-transfer apparatus. The results show that the contact angle of the heat-transfer surface linearly decreased with spray deposition time, which resulted in an increased critical heat flux. The oxidized multi-wall carbon nanotubes and Graphene showed maximum pool-boiling heat-transfer coefficients at 19.8° and 21.7° respectively while the pool-boiling heat-transfer coefficients decreased at angles of 9.9° or less and 12.5° or less, respectively.