保险丝(电气)
屈曲
材料科学
结构工程
刚度
消散
环氧树脂
复合材料
薄泥浆
工程类
热力学
电气工程
物理
作者
Royce Liu,Alessandro Palermo
出处
期刊:Journal of Structural Engineering-asce
[American Society of Civil Engineers]
日期:2020-02-28
卷期号:146 (5)
被引量:30
标识
DOI:10.1061/(asce)st.1943-541x.0002591
摘要
The grooved-type dissipater is an axial, metal hysteretic dissipative device. It is an alternative to the epoxy- or grout-filled buckling restrained fuse (BRF)-type dissipater. This device consists of a mild steel rod which has grooves milled into it to reduce the cross-sectional area to form the fuse. A thick-walled circular hollow section (antibuckling tube) covers the fuse length and prevents global inelastic buckling of the fuse in compression. The advantage of this device is that it consists of only two parts and does not require the use of expensive grout or epoxy filler. This paper describes a state-of-the-art device, presented formulations describing important geometric properties and discussed their engineering implications, presented experimental and numerical investigations undertaken to characterize the low-cycle fatigue life of the grooved dissipater, and obtained coefficients to model this phenomenon using either the Fatigue material in OpenSees or the well-known Coffin–Manson equation and Palmer–Milgren damage rule.
科研通智能强力驱动
Strongly Powered by AbleSci AI