材料科学
夏比冲击试验
环氧树脂
复合材料
热固性聚合物
热塑性塑料
固化(化学)
共聚物
热重分析
韧性
艾氏冲击强度试验
粒径
聚合物混合物
聚合物
化学工程
极限抗拉强度
工程类
作者
Haroon Mahmood,Andrea Dorigato,Alessandro Pegoretti
出处
期刊:Express Polymer Letters
[Budapest University of Technology and Economics]
日期:2020-01-01
卷期号:14 (4): 368-383
被引量:31
标识
DOI:10.3144/expresspolymlett.2020.31
摘要
In this paper, the thermal mending potential of a cyclic olefin copolymer (COC) in a thermosetting matrix was evaluated for the first time.Epoxy/COC blends were prepared by mechanically mixing a COC powder (particle size lower than 300 µm) at different concentrations (10, 20, 30 and 40 wt%) in an epoxy resin in the uncured (liquid) state.The presence of a homogenous dispersion of COC particles within the epoxy matrix after curing was confirmed by optical microscopy analysis on polished specimens.Thermogravimetric tests evidenced a positive contribution of the thermoplastic COC phase on the thermal degradation resistance of the blends.The fracture toughness of the blends (both under quasi-static and Charpy impact conditions) increased with the addition of COC.Healing tests were performed on broken samples after healing under a compressive stress of 15 MPa at 190 °C for 1 hour.A significant increase of the healing efficiency with the COC content was detected, and healing efficiency values very near to 100% were obtained for a COC content of 40 wt%.
科研通智能强力驱动
Strongly Powered by AbleSci AI