材料科学
纤维增强塑料
复合材料
极限抗拉强度
失效模式及影响分析
复合数
方位(导航)
螺栓连接
玻璃纤维
接头(建筑物)
张力(地质)
承载力
结构工程
有限元法
地图学
地理
工程类
作者
Dong-Uk Kim,Hyoung-Seock Seo,Ho-Yun Jang
摘要
With the gradual application of composite materials to ships and offshore structures, the structural strength of composites that can replace steel should be explored. In this study, the mechanical bearing strength and failure modes of a composite-to-metal joining structure connected by mechanically fastened joints were experimentally analyzed. The effects of the fiber tensile strength and stress concentration on the static bearing strength and failure modes of the composite structures were investigated. For the experiment, quasi-isotropic [45°/0°/–45°/90°]2S carbon fiber-reinforced plastic (CFRP) and glass fiber-reinforced plastic (GFRP) specimens were prepared with hole diameters of 5, 6, 8, and 10 mm. The experimental results showed that the average static bearing strength of the CFRP specimen was 30% or higher than that of the GFRP specimen. In terms of the failure mode of the mechanically fastened joint, a cleavage failure mode was observed in the GFRP specimen for hole diameters of 5 mm and 6 mm, whereas a net-tension failure mode was observed for hole diameters of 8 mm and 10 mm. Bearing failure occurred in the CFRP specimens.
科研通智能强力驱动
Strongly Powered by AbleSci AI