材料科学
灰烬
热重分析
烧结
微观结构
扫描电子显微镜
化学工程
氧化物
动力学
聚合物
陶瓷
微量分析
复合材料
冶金
相(物质)
化学
相图
有机化学
量子力学
物理
工程类
作者
Nils‐Christian Petry,Anke S. Ulrich,Bo Feng,Emanuel Ionescu,Mathias C. Galetz,Maren Lepple
摘要
Abstract The focus of the present work is the investigation of the influence of polymer‐derived ceramics, used as sintering aids for preparing ZrB 2 ‐based monoliths, on their high‐temperature oxidation behavior. For the preparation of the monoliths, ZrB 2 powder was coated with polymer‐derived SiCN, SiZrCN, or SiZrBCN and subsequently densified via hot‐pressing at temperatures as low as 1800°C. To investigate the oxidation kinetics, thermogravimetric analysis (TGA) was performed at 1300°C in synthetic air with exposure times of 50 and 100 h. A detailed study of the materials oxide scale and subsurface microstructure was conducted using optical microscopy, electron probe microanalysis, scanning electron microscopy, and X‐ray diffraction. The experimental findings were compared to thermodynamic equilibrium calculations using the CALPHAD method, which led to a better understanding of the oxidation mechanism. In comparison to the literature data of ZrB 2 –SiC, the results show improved oxidation resistance for all three investigated materials. The formation of gaseous species during oxidation, in particular CO, CO 2 , B 2 O 3 , and SiO, within the oxide scale of the monoliths was rationalized via CALPHAD calculations and used to explain the oxidation behavior and kinetics and also the formation of bubbles in the subsurface region of the oxidized specimens.
科研通智能强力驱动
Strongly Powered by AbleSci AI