CO2-assisted ‘Weathering’ of Steel Slag-Derived Calcium Silicate Hydrate: A Generalized Strategy for Recycling Noble Metals and Constructing SiO2-Based Nanocomposites

The spent adsorbent loaded by toxic metals is a solid hazardous waste which could cause significant secondary pollution due to potential possible additional release of metal ions. Therefore, the main subject is direct reutilization of spent adsorbents which can further economically and realistically offer new features, like recycling metal adsorbed, or formation of functional SiO2-based nanocomposites. The nanoporous structure and negative surface charges enable steel slag-derived amorphous calcium silicate hydrate (CSH) to retain effectively the incoming metal ions (e. g. Au3+, Ag+, Pd2+, Fe3+, Co2+, Ni2+, Cu2+, Zn2+, Ce3+, Y3+, and Gd3+) by chemisorption. Sparked by natural carbonation 'weathering', which ultimately sequestrates atmospheric CO2 by alkaline silicate minerals to leach calcium from mineral matrix, the decalcification reactions of metal-bearing CSH results in successful recovery of noble metals (Ag, Au, Pd) upon NaOH etching the resultant SiO2 support. Further, SiO2-based heterostructures, containing nanocrystalline metals (e. g. Au0, Ag0, Pd0, Fe0, Co0, Ni0, Cu0, and Zn0) or rare-earth oxides (e. g. CeO2, Y2O3, and Gd2O3), are formed after reduction in H2/Ar (5 vol% H2) flow, which is also very important for the multipurpose immobilization of diverse hybrid materials on SiO2 surface (e. g. Cu0-Ag0@SiO2, Cu0-CeO2@SiO2, and Cu0-Ag0-CeO2@SiO2).