材料科学
介电谱
固体氧化物燃料电池
极化(电化学)
氧化物
电解质
化学工程
电化学
电极
燃料电池
欧姆接触
制氢
氢
电阻抗
固溶体
纳米技术
X射线光电子能谱
可再生能源
光电子学
分析化学(期刊)
氢燃料
无机化学
作者
Ryota Ozaki,Yohei Nagatomo,Mio Sakamoto,Masahiro Yasutake,Yuya Tachikawa,Stephen Matthew Lyth,Junko Matsuda,Kazunari Sasaki
标识
DOI:10.1149/1945-7111/aeb04b
摘要
Reversible solid oxide cells (r‐SOCs) are promising technologies for integrating intermittent renewable electricity with hydrogen production and storage, and their performance strongly depends on fuel‐electrode design. This study examines the influence of Ni-GDC and Ni-YSZ functional layers in YSZ‐based fuel‐electrode‐supported r‐SOCs fabricated by co‐sintering at 1350 °C or 1275 °C. For both temperatures, Ni-GDC consistently yields lower performance than Ni-YSZ due to the formation of GDC-YSZ solid solutions at the functional layer/electrolyte interface. Electrochemical impedance spectroscopy (EIS) and distribution of relaxation times (DRT) analyses reveal that these solid solutions substantially raise both ohmic and polarization resistances, with the charge‐transfer process at Ni-GDC contributing ∼59% of the total polarization resistance at 700 °C. Despite reduced Ce-Zr interdiffusion at 1275 °C, solid‐solution formation persists and limits ionic/electronic transport, suppressing the expansion of the mixed‐conducting reaction zone. These findings clarify why Ni-GDC underperforms in YSZ‐supported architectures and highlight the need for strategies that mitigate GDC-YSZ interdiffusion. These could include optimized low‐temperature co‐sintering, improved electrolyte sinterability, or the incorporation of diffusion‐barrier layers, with the potential to fully leverage Ni-GDC functional layers in high‐performance r‐SOCs.
科研通智能强力驱动
Strongly Powered by AbleSci AI