雷亚克夫
分子动力学
材料科学
抛光
复合材料
化学工程
动力学(音乐)
纳米技术
纳米
纳米颗粒
摩擦学
原子力显微镜
粒子动力学
作者
Juan Ignacio Ahuir‐Torres,Xun Chen,Yasemin Akar,Paul A. Bingham,Frankie F. Jackson,Hongyu Li,Luke Mason,Rakesh Mishra,David Walker,Guoyu Yu
标识
DOI:10.1016/j.triboint.2026.112927
摘要
Fused silica is the material commonly used to generate ultra-smooth optical glasses while β-ceria (β-CeO 2 ) and α-alumina (α-Al 2 O 3 ) are typical abrasive powders used in glass polishing processes. The chemical composition of the polishing media is a key consideration in the glass polishing, which combines mechanical, physical and chemical processes. However, the real time influence of the medias’ chemical composition has scarcely been studied in existing literature. The performance of polishing processes at nanoscale presents a significant challenge in the analysis of conventional experimental results. This paper highlights the capability of ReaxFF-MD (reactive force field molecular dynamics) simulation method that enables the study of nanoscale polishing processes in real time, which is an important step to assess the mechanical, physical and chemical mechanisms of fused silica polishing with water based α-alumina and β-ceria slurry. Two stages of polishing were observed in this investigation, i.e. elastic and plastic deformation. The simulation with α-alumina presented a densified glass microstructure resulting from polishing. Metastable chemical products (e.g., Ce ( OH ) 4 − Ce − and ( OH ) 3 Si − O − Ce ( OH ) 3 − Ce − Si − Si OH 4 + OH ) was observed in the simulation with β-ceria. Plastic deformation was observed in both cases. The metastable product was a polymer with double bonds. It has demonstrated that polishing is encouraged with β-ceria media due to its high chemical activity. The hydroxylation reaction occurred before and during the grain contact with the optical glass surface.
科研通智能强力驱动
Strongly Powered by AbleSci AI