量化(信号处理)
全球导航卫星系统应用
电子工程
计算机科学
噪音(视频)
相位噪声
噪声测量
物理
卫星导航
控制理论(社会学)
信噪比(成像)
噪声整形
电气工程
工程类
本振子
信号处理
噪声温度
测量不确定度
频率调制
算法
噪声地板
作者
Wei Song,Chuang Shi,Guifei Jing
标识
DOI:10.1109/tim.2026.3716508
摘要
The performance of modern measurement and instrumentation systems increasingly depends on the precision and stability of their time and frequency outputs. In global navigation satellite system (GNSS)-disciplined oscillators, the achievable performance is increasingly limited by the internal control of the disciplining terminal. In this study, an enhanced method for clock disciplining using a phase-locked loop (PLL), focusing on digital-to-analog converter (DAC) quantization noise, is developed, and a GNSS-enabled clock disciplining terminal is proposed. This terminal integrates differential precise time transfer (DPT) to estimate clock offset parameters in real time, providing high-precision input for PLL-based clock disciplining. The proposed method meticulously models the phase noise in each module of the loop, including time reference noise, oscillator noise, and DAC quantization noise. By optimizing the loop bandwidth at a hardware-aware threshold of 0.25 Hz, the system suppresses short-term deterministic quantization chatter at the algorithmic level while preserving the long-term tracking integrity of the external high-precision time reference. A hardware prototype is implemented and evaluated using the national timescale reference UTC National Institute of Metrology (NIM). Experimental results demonstrate that the long-term frequency stability of the disciplined oscillator reaches a$10^{-15}$level at an averaging time of 10 000 s, which is fundamentally governed by the high-precision DPT reference. Crucially, by virtue of the proposed loop bandwidth and quantization optimization, the system effectively mitigates the short-to-medium-term hardware-induced noise floor, achieving a sub-100 ps 1-pulse-per-second (1PPS) time synchronization.
科研通智能强力驱动
Strongly Powered by AbleSci AI