条件作用
材料科学
微观结构
复合材料
凝聚态物理
温度梯度
冶金
光电子学
基质(水族馆)
电流(流体)
作者
Jianqi Liu,Zhixu Qi,Xiyao Li,Kai Li,Xiaojun Miao,Weiyang Long,Zhiyuan Zhu,Jiangwei Wang,Kexing Song
出处
期刊:Vacuum
[Elsevier BV]
日期:2026-03-18
卷期号:249: 115276-115276
标识
DOI:10.1016/j.vacuum.2026.115276
摘要
Conditioning is an essential procedure for enhancing the breakdown voltage of contact materials, typically ascribed to arc-induced surface modifications. However, the internal microstructures of these materials are also arc-affected and inevitably undergo specific changes yet remain poorly understood, especially at the high-voltage conditioning. Here, we investigated the effects of high-voltage conditioning on the microstructural features of CuCr 40 contact materials, focusing on the different responses of the Cu matrix and the Cr phase. The conditioning process imposed a minor influence on the surface Cu matrix but induced a high-density of twin boundaries into the internal Cu matrix. In contrast, the surface Cr phase was more susceptible to conditioning, leading to the well-defined gradient structures. Specifically, the surface Cr phase underwent pronounced fragmentation and nanocrystallization; while subsurface Cr phase facilitated the formation of Cu particles via Ostwald ripening. Moreover, an increasing in applied voltage accelerated elemental interdiffusion at Cu/Cr interfaces, reduced the dissolved oxygen in the surface Cr phase and promoted further refinement of the surface Cr phase. These findings provide comprehensive insights into the microstructural evolution of contact materials under voltage conditioning.
科研通智能强力驱动
Strongly Powered by AbleSci AI