故障树分析
危险和可操作性研究
可操作性
可控性
制动器
可靠性工程
失效模式及影响分析
汽车工程
计算机科学
过程(计算)
系统安全
汽车工业
弹道
功能安全
断层(地质)
工程类
碰撞
功能(生物学)
事件树
控制理论(社会学)
工作(物理)
故障检测与隔离
组分(热力学)
模式(计算机接口)
毒物控制
顺序图
作者
Yage Di,Xinyao Chen,Jie Lu,Pengfei Jiang,Guo‐Xin Ying,Zhentao Jiang,Xinyu Huang
标识
DOI:10.1177/09544070261464267
摘要
To support quantitative functional safety (FuSa) concept development for an electro-mechanical brake (EMB) system, a fault injection (FI) method based on high-precision CarSim/Simulink co-simulation was employed to determine Automotive Safety Integrity Level (ASIL) ratings. The general development process of FuSa followed ISO 26262, which defines relevant items, and requires a comprehensive analysis of potential failure scenarios. In addition, failure mode analysis was performed using the HAZOP (Hazard and Operability Study) method, and fault tree analysis (FTA) was employed to investigate the root causes of braking function failures. For the risk assessment, thresholds for severity (S, measured by collision type and collision velocity difference), exposure (E, measured by scenario type and corresponding vehicle speed), and controllability (C, measured by time-to-collision, TTC) are defined using a parameterization method. The results shown that FI simulation can provide the real-time vehicle dynamic behavior for all hazardous events such as single or multiple wheel brake failures during EMB system braking, which are then compared against predefined thresholds to determine the severity (S), exposure (E), and controllability (C) levels for each operating condition, and ultimately the ASIL level and corresponding safety goals for EMB FuSa concept were generated. This quantitative assessment using the FI method could provide quantitative support for HARA (Hazard Analysis and Risk Assessment) analysis and subsequent functional safety development.
科研通智能强力驱动
Strongly Powered by AbleSci AI