Main Routes of Production of High-Value-Added 2,5-Furandincarboxylic Acid Using Heterogeneous Catalytic Systems

The production of polymers from lignocellulosic biomass is currently one of the challenges to minimizing dependence on fossil fuels such as oil. The cellulosic fraction of this feedstock can be transformed into simple sugars such as glucose or fructose. These sugars can be further converted into 2,5-furandicarboxylic acid (FDCA), a precursor of polyethylene furanoate (PEF). The dehydration of sugars to 5-hydroxymethylfurfural (HMF), a platform molecule to obtain products of interest, has been extensively studied. In addition, the oxidation of this platform molecule to FDCA has been widely investigated. However, a study of the direct or one-step production of FDCA from sugars is needed. This review provides a general overview of the recent research on the catalytic systems for the direct production of FDCA from sugars. Ideally, a single-stage system should be employed. The investigations carried out in a one-step process are first detailed. Different strategies have been tested, such as the physical separation of two phases, where dehydration and oxidation took place separately. In this case, an efficient transfer of HMF is needed. To avoid HMF transfer limitations, other authors focused on the investigation of the one-pot transformation of HMF without physical separation. The major requirement of these processes is to achieve catalytic systems functional for both dehydration and oxidation reactions. Therefore, other investigations focused on the study of two-step integrated systems are also analyzed in this review.