Biomass volatiles reforming by integrated pyrolysis and plasma-catalysis system for H2 production: Understanding roles of temperature and catalyst

Biomass utilization is considered a carbon–neutral way to simultaneously tackle the energy crisis and environmental contamination. Challenges still exist to hinder its application, such as low products yield, tar blockage, harsh condition and inferior stability. This paper aims to study whether the newly developed integrated pyrolysis and plasma-catalysis system can be applied into practice of H2 production from real biomass volatiles, and to understand roles of temperature and catalyst. The experiments were performed in a two-stage reactor embedded with a coaxial dielectric barrier discharge plasma zone. Impacts of operating conditions (i.e. discharge power, steam input, heat supply and catalyst packing) on H2 production were investigated. The results show that proper input of discharge power and steam can promote H2 production. Heating supply is recognized as two different effects on plasma-only and plasma-catalysis systems, since reaction temperature elevation acts as inhibitor to plasma characters and cut down the contribution of plasma reforming. After packing bimetallic Ni-Fe/γ-Al2O3 catalyst into plasma, optimal 47.65 mmol/g of H2 can be attained at reforming temperature of 500 ℃, with synergy effects observed. Plasma-catalysis system also outperformed in tar cracking, tar elimination and stability test, attributed to plasma assistance. This work provides an alternative to construct a new plasma-catalysis process for H2 production from biomass volatiles or to couple plasma technology with existing biomass conversion industries for preferable energy and fuel production, highlighting its promising commercialization prospects.