碳化
阳极
法拉第效率
碳纤维
材料科学
化学工程
生物量(生态学)
电化学
钠离子电池
制浆造纸工业
钠
化学
复合材料
冶金
电极
农学
物理化学
复合数
生物
扫描电子显微镜
工程类
作者
Junjie Huo,Chuanyang Li,Peng Cheng Xia,Na Fan,Wutao Mao,Keyan Bao
标识
DOI:10.1007/s10800-024-02235-4
摘要
Abstract Currently, sodium-ion batteries (SIBs) are favored by scientific researchers because of their abundance, low cost, and high safety. Furthermore, hard carbon has a low voltage plateau and a high sodium storage capacity when used as the anode material in SIBs. Given its affordability and variety of sources, biomass hard carbon has gained interest. However, the low initial coulombic efficiency (ICE) of biomass hard carbon significantly hinders its development. Therefore, waste biomass locust wood was utilized to produce hard carbon at various carbonization temperatures. The wood was treated with 6M HCl before carbonization, so as to look into how acid treatment affects the microstructure of carbon materials and how that affects their electrochemical characteristics. The experimental results proved that the HCl-pretreated hard carbon could increase the carbon layer spacing, increase more surface active sites that favor Na+ storage, and decrease the specific surface area. HC-1500 and HHC-1500 possessed a first lap charge specific capacity of 319.6 mAh/g and 382.3 mAh/g, respectively, with an increase in the a first-circle coulombic efficiency (ICE) from 62% to 67%, and also had a significant improvement in the cycling performance. Therefore, treating waste biomass with hydrochloric acid is a direct and effective method to modify hard carbon and improve its electrochemical performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI