电子设备和系统的热管理
能源消耗
能源管理
热的
汽车工程
热能
计算机科学
消费(社会学)
能量(信号处理)
环境科学
航空航天工程
电气工程
机械工程
工程类
物理
气象学
热力学
社会学
量子力学
社会科学
作者
Jianchao Ma,Zhigang Yang,Lanping Zhao
出处
期刊:
[Institute of Electrical and Electronics Engineers]
日期:2024-08-09
卷期号:: 1449-1457
被引量:2
标识
DOI:10.1109/eeps63402.2024.10804489
摘要
Compared with the traditional distributed thermal management scheme, the integrated thermal management system can jointly interact with each thermal management subsystem, make full use of the energy of each part of the electric vehicle, which is conducive to solving the problem of the winter range decay of pure electric vehicles. Based on the heat pump system, this paper designs an integrated thermal system with the cabin thermal management system as the core, coupled with the battery thermal management system and the Drive cooling system. The control strategy of logic threshold combined with PID (Proportion Integration Differentiation) control is designed according to the temperature change of heating process. The system operating characteristics and energy consumption are analyzed and compared in the vehicle environment. The research shows that PTC (positive temperature coefficient thermistor) can ensure the heating rate of the cabin and battery under low temperature environment, but it will increase the energy consumption of the integrated system. Under the ambient temperature of -10°C and WLTC condition, PTC energy consumption accounts for 40% of the energy consumption of the integrated thermal system. As the ambient temperature drops, the advantages of waste heat recovery begin to manifest. Through the waste heat recovery of the electric drive system, the heat pump performance attenuation caused by low temperature can be alleviated. Under the low temperature of - 10°C and the high-speed working condition of 120km/h, the heat production of the heat pump system can be increased by 720W, and the COP can be increased by 14%, thus improving the driving range of electric vehicles.
科研通智能强力驱动
Strongly Powered by AbleSci AI