电阻抗
不连续性分类
特性阻抗
输电线路
微带线
声学
偏移量(计算机科学)
高阻抗
阻抗匹配
间断(语言学)
四分之一波阻抗变压器
材料科学
图像阻抗
电子工程
电气工程
计算机科学
物理
工程类
数学
阻尼系数
数学分析
程序设计语言
作者
Vaidotas Barzdėnas,Aleksandr Vasjanov
出处
期刊:Journal of Electrical Engineering
[De Gruyter]
日期:2023-04-01
卷期号:74 (2): 122-126
被引量:2
标识
DOI:10.2478/jee-2023-0016
摘要
Abstract High-speed and high-frequency PCB interconnect solutions with the slightest discontinuities in the physical geometry along the microstrip transmission line can significantly degrade the integrity of the signal being transferred. This paper presents an analysis of SMT component pads and their impact on the successive transmission line impedance. During 0805, 1206 and 2512 package size SMT component pad discontinuity evaluations it was spotted, that the increasing deviation from target impedance affects the microstrip impedance segment following the discontinuity. A 25 Ω impedance offset at the SMT pad reduces the line impedance afterwards by up to 7 Ω. A 37 Ω impedance offset results in a microstrip impedance reduction by up to 15 Ω , whereas a 45 Ω impedance change leads to a reduction of successive segment impedance by up to 30 Ω. This effect is also present in multiple evenly-spaced discontinuities. But a single reference plane cut-out, which is twice as wide as the SMT component discontinuity, substantially improves the overall impedance of the transmission line, including the successive line segment impedance drop.
科研通智能强力驱动
Strongly Powered by AbleSci AI