材料科学
锻造
微观结构
冶金
铝
变形(气象学)
热加工
复合材料
作者
Qian Sun,Yi Yang,Guojing Ren,Huijuan Ma,Qubo Long,Jia Zheng,Feng Yun Huang,Zhili Hu
标识
DOI:10.1177/02670836251358118
摘要
Integrated hot forging process (solid solution → forging → aging) of aluminum alloy exhibits a distinct advantage in terms of shortening the processing time and enhancing the mechanical properties. Based on this, solution-hot deformation and then aging experiments, as well as OM, SEM and EBSD tests were carried out to investigate the effect of deformation temperatures (410°C, 440°C, 470°C, 490°C) on the microstructure and mechanical properties of aged 7075 aluminum alloy. The results indicate that the average strength and hardness of the aged alloy samples exhibit a gradual increase as the deformation temperature rises. When subjected to a deformation temperature of 490°C, the alloy displays optimal tensile properties, with an ultimate tensile strength of 536 MPa and a yield strength of 480 MPa. Simultaneously, the increase of deformation temperature causes a reduction of dislocation density within the alloy, enhances the degree of recrystallization, and promotes more uniform grain size and tendency to sphericalization. Especially, with a lower deformation temperature, the primary precipitates precipitated early after hot deformation and then grow and coarsen during the subsequent aging. This results in a lower volume fraction of nanoscale precipitates during subsequent aging, which is the primary factor leading to the decrease of mechanical properties for the alloys with the reduction in deformation temperature.
科研通智能强力驱动
Strongly Powered by AbleSci AI