止回阀
活塞泵
往复运动
活塞(光学)
往复泵
截止阀
断层(地质)
轴向柱塞泵
机械工程
针阀
机制(生物学)
有限元法
刚度
工程类
圆柱
运动仿真
气门正时
可靠性(半导体)
结构工程
计算机模拟
功率(物理)
变量泵
模拟
地质学
哲学
气体压缩机
物理
地震学
波前
光学
认识论
量子力学
内燃机
作者
Ran Li,Wenshu Wei,Yuehua Lai,Hongbing Lu,Tianze Cao,Jian Ye,Hao Liu
出处
期刊:Science Progress
[SAGE Publishing]
日期:2025-01-01
卷期号:108 (1): 368504251325327-368504251325327
被引量:2
标识
DOI:10.1177/00368504251325327
摘要
With the increase in power and flow of emulsion pumps, pump valves are more likely to be damaged during long working hours, Therefore, it is important to ensure the reliability of pump valves at all stages. However, there are still some problems that need to be solved urgently. For example, whether the actual dynamic characteristics of the valve are consistent with the simulation results, and whether the simulation can replace experiments to provide a reference for the design improvement of the valve. At the same time, what is the failure mechanism of the valve, and what methods can be used to find the early failure of the valve. Therefore, the dynamic impact contact characteristics and fault diagnosis of valves of reciprocating piston pumps were investigated both experimentally and numerically. They were analyzed using AMESim simulation and U-Adolph theory, respectively, to predict the dynamic characteristics of the valve. The effect of spring stiffness on the dynamic characteristics of the valve was also investigated. The numerical analysis and analytical results are in good agreement with the experimental results, which provide an important reference for the development of new horizontal five-cylinder single-acting reciprocating pumps. In addition, finite element analysis was used to study the impact contact characteristics of the discharge valve closing under different valve diameters. The failure mechanism of the pump and valve was revealed, a fault diagnosis method was proposed, and the effectiveness of the method is verified by experiment.
科研通智能强力驱动
Strongly Powered by AbleSci AI