材料科学
电阻率和电导率
兴奋剂
过渡金属
氧化物
图层(电子)
电导率
冶金
分析化学(期刊)
无机化学
复合材料
化学
物理化学
光电子学
电气工程
有机化学
催化作用
工程类
作者
Hao Shi,Haozhen Li,Xing Zhou,Chongqing Yang,Hengyong Tu,Jun Tong,Longkai Xiang,Chao Ma,Lei Zhu,Zhen Yu Huang
标识
DOI:10.1021/acsaem.4c00207
摘要
Spinels have been widely employed as contact layers (CLs) on metallic interconnects for solid oxide cells (SOCs) with the required electrical conductivity and Cr block ability. In this work, MnCo 2 O 4 spinels doped with different transition metals (Cu, Ni, and Zn) were deposited on precoated SUS441 stainless steel as CLs. A positive doping effect of Cu and Ni on increasing the concentration of Mn 4+ /Mn 3+ and Co 3+ /Co 2+ hopping pairs was observed, whereas a negative doping effect of Zn on electrical conductivity was confirmed, which was reflected in the data of X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectra (XAS). The Cu-doped Mn 1 Co 1.7 Cu 0.3 O 4 spinel exhibited the best electrical conductivity with a low area specific resistance (ASR) value of 4.5 mΩ·cm 2 at 850 °C. A relative degradation test demonstrated that Mn 1 Co 1.7 Cu 0.3 O 4 maintained significant performance during a 200 h isothermal process. Cross-sectional observations revealed that the thickness of the Cr oxide scale formed during the degradation test was much reduced by the Mn 1 Co 1.7 Cu 0.3 O 4 CL, which was attributed to the improved resistance to Cr oxidation. The present work shed light on the design of highly conductive CLs in SOCs.
科研通智能强力驱动
Strongly Powered by AbleSci AI