Out-of-plane performance of BFRP reinforced UHPC thin panel: experiment and numerical analysis

In this study, the out-of-plane performance of ultra-high performance concrete (UHPC) thin panels reinforced with basalt fiber reinforced polymer (BFRP) bars was investigated. Eight panels were tested under four-point load, with the investigating parameters including panel thickness, reinforcement ratio, and the presence of steel fibers. The failure mode, crack pattern, load vs. mid-span displacement, and reinforcement strain relationships were studied. Test results revealed that panels with a higher thickness (70 mm) exhibited 178.6% higher initial stiffness, 34.5% higher cracking loads, and 88.7% higher peak loads compared to those with a lower thickness (50 mm). The effects of a larger reinforcement ratio and the presence of steel fibers became more pronounced after concrete cracking, leading to 21.2% and 22.1% higher post-cracking stiffness, respectively. Adding steel fibers helped control the development of diagonal cracks and shifted the panel failure mode from shear to flexural failure. Based on the comparison of test results with design codes, the expressions in CAN/CSA-S806-12 were recommended for predicting the load-carrying capacity of the specimens. Furthermore, a two-dimensional finite element (FE) model was developed to reproduce the test results, which validates the adopted CDP model for UHPC and the bond-slip behaviors between UHPC and BFRP bars.