摩擦电效应
纳米发生器
材料科学
聚酰亚胺
光电子学
纳米纤维
电压
开路电压
复合材料
图层(电子)
电气工程
压电
工程类
作者
Feilong Shi,Xin Wei,Huicai Wang,Xiaoqing Wu
出处
期刊:ACS applied electronic materials
[American Chemical Society]
日期:2022-09-09
卷期号:4 (9): 4569-4575
被引量:6
标识
DOI:10.1021/acsaelm.2c00781
摘要
The thermionic emission effect and the destruction of the polymer surface structure caused by elevated temperatures severely affect the electron transfer in triboelectric nanogenerator (TENGs); thus, previous studies on the performance of polymer-based TENGs at elevated temperatures have mainly focused on that below 200 °C. Polyimide (PI) with high thermal stability and excellent triboelectric negativity has been widely used in the TENG but lacks systematic investigation in high-temperature environments. Hence, we systematically evaluated the output performance of a polyimide nanofiber-based TENG (PINF-TENG) composed of an electrospun polyimide nanofiber (PINF) and copper foil at 25–250 °C. The PINF-TENG generated an open-circuit voltage of 60.83 V and a short-circuit current of 1.52 μA at 25 °C, and a peak power density of 17.36 mW/m2 was achieved on a 50 MΩ external load. The open-circuit voltage and short-circuit current decreased sharply with the increase of temperature, while the optimal load resistance increased, which has not been reported in previous studies of polymer-based TENGs. In addition, the PINF-TENG can still maintain 25.48% of the voltage and 23.03% of the current at 250 °C with regard to those at 25 °C, which can stably charge the capacitor and drive 20 commercial green light-emitting diodes (LEDs). Therefore, this PINF-TENG has great application prospects for harvesting energy and sensing motion in hot gas, space, and many other high-temperature environments.
科研通智能强力驱动
Strongly Powered by AbleSci AI