材料科学
霜冻(温度)
复合材料
耐久性
聚丙烯
抗压强度
纤维
纤维增强塑料
动态模量
弹性模量
模数
结构工程
动载荷
纤维混凝土
混凝土性能
材料性能
作者
Qinglong Zhang,Chunqing Li,Guoyu Li,Dun Chen,Xuyang Wu,Yapeng Wang,Yuncheng Mao,Kun Zhang
出处
期刊:Buildings
[Multidisciplinary Digital Publishing Institute]
日期:2025-11-06
卷期号:15 (21): 4002-4002
被引量:10
标识
DOI:10.3390/buildings15214002
摘要
This study presents a systematic evaluation of frost resistance in concrete modified with nano-alumina (NA, 1 wt%), nano-silica (NS, 2 wt%), and polypropylene fiber (PP, 0.2 wt%) through accelerated freeze–thaw testing. The investigation employed a comparative experimental approach, subjecting specimens with optimal mechanical dosages to 300 freeze–thaw cycles. The degradation was quantitatively assessed by monitoring the evolution of mass loss, dynamic elastic modulus, and compressive strength. Results reveal that PP-modified concrete demonstrates optimal performance, retaining 70% of its dynamic elastic modulus (vs. 68% for NA and 64% for control, and failing at 58% for NS after 200 cycles) and exhibiting only 9.3% compressive strength loss (vs. 13.9% for NA and 27.3% for control, and 43.6% for NS). These findings establish PP as the most effective modifier, offering both superior frost resistance (300+ cycle durability) and practical advantages (simpler processing, lower cost). The results provide a scientific basis for designing high-performance concrete in cold regions, with particular relevance to infrastructure requiring long-term durability under cyclic freezing conditions.
科研通智能强力驱动
Strongly Powered by AbleSci AI