摘要
The revolution in portable electronic devices and the electrification of vehicles have been aided by lithium-ion (Li-ion) batteries. The dominance of Li-ion batteries is possible due to their high energy density compared to other rechargeable battery systems [1]. However, the current system of Li-ion batteries is far behind the actual requirements. Therefore, the development and optimization of electrode materials are necessary [2]. For anode materials, silicon is considered one of the most promising alternative candidates for next-generation anode material due to its high theoretical capacity (3600 mAh g-1 for Li15Si4) [3]. Moreover, silicon is the second most abundant element on the Earth’s crust, environmentally benign and has low working potential (<0.4 V vs. Li/Li+). However, silicon electrodes suffer from large volumetric expansions during the lithiation/delithiation process (300-400 %) and sluggish ion diffusion, resulting in pulverisation and isolation. To address the abovementioned issues, various silicon-based electrode materials with different modifications have been analysed. In this work, commercial silicon particles (ReSiTec) were enriched by different amounts of single-walled carbon nanotubes (CNTs). The size of silicon particles was around 1 μm, and the amount of silicon in the electrode material was 20%. The CNTs were added in 0.25% and 0.5% in order to find out the best amount of CNTs to improve the electrode performance. The results show that 0.5% of CNTs in the electrode material can significantly improve the performance at higher C-rates, indicating improved conductivity and suppressed volumetric expansion. The electrode materials without CNTs and with 0.25% of CNTs showed comparable results. Acknowledgements This work was supported by the EU Horizon 2023 research and innovation program under the Marie Sklodowska-Curie Postdoctoral Fellowship Grant no. 101152715 (SALSA project). References [1] Manthiram, A. (2020). A reflection on lithium-ion battery cathode chemistry. Nat Commun 11, 1550. [2] Sun, L., Liu, Y., Shao, R., Wu, J., Jiang, R., & Jin, Z. (2022). Recent progress and future perspective on practical silicon anode-based lithium-ion batteries. Energy Storage Mater 46, 482–502. [3] Li, P., Kim, H., Myung, S., & Sun, Y. (2020). Diverting Exploration of Silicon Anode into Practical Way: A Review Focused on Silicon-Graphite Composite for Lithium Ion Batteries. Energy Storage Materials, 35, 550–576. Figure 1